Saginaw SCE-20168ELJ Junction Enclosure, 20" x 16" x 8"
Saginaw Control & Engineering Enviroline Series SCE-20168ELJ is a hinged single door junction enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and measures 20" H x 16" W x 8" D (508mm x 406.4mm x 203.2mm). House electrical components, instruments, and controls in hose down applications or those that are in wet or oily environments.
Continuously welded & ground smooth seams
Flange trough collar around door opening
Gasket is oil resistant
Standoffs for mounting sub-panel included (sub-panel sold separately)
Hinges are removable
Door opens 180 degrees
Features two black mini quarter turn latches (operated with a screwdriver)
Ground stud on door and body
Mounting feet, sealing washer, & hole plugs included
IS4 industry standards - NEMA Type 3R, 4, 12 and Type 13, UL Listed Type 3R, 4 and 12, CSA Type 3R, 4 and 12, IEC 60529, IP 66 (Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door)
Est. Ship Weight: 23.00 lbs
0.063 In. carbon steel.
Seams continuously welded and ground smooth.
Flange trough collar around all sides of door opening.
Pour in place oil & water resistant gasket.
10-32 Standoffs provided for mounting optional panels.
Doors open 180 degrees.
Black mini quarter turn latches.
Latches are opened or closed with a screwdriver.
Sealing washers and hole plugs included.
Ground stud on door & body.
Mounting feet included.
Designed to house electrical controls, instruments and components in areas which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield and drain vent is recommended.
ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.
Industry Standards - (IS4):
NEMA Type 3R, 4, 12 and Type 13
UL Listed Type 3R, 4 and 12
CSA Type 3R, 4 and 12
Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.