Hylomar Aerograde is a highly engineered, non-setting and non-hardening gasketing compound for use in the aeronautical industry with a wide operating temperature of -50°C to +250°C. Hylomar Aerograde was developed in conjunction with Rolls Royce – Aerospace Division for sealing joints in turbine engines.
Hylomar Aerograde is resistant to:
- Air, water and oils
- Turbine and piston engine combustion products
- Water/glycol and methanol/water mixtures
- Petroleum and synthetic diester lubricating oils
FEATURES
- Non-hardening and non-setting
- Resistant to air, water and oils
- Specified worldwide by OEM’s
- Wide operating temperatures (- 50°C to +250°C)
- Easy to use
- Unlimited assembly time
- Easy to disassemble components
- For use on metal and plastic close fitting components
- Use as a non-curing thread sealant
- Resists vibration
- Easy to apply to vertical and underside joints due to its thixotropic properties
- Can be used with or without a gasket
TYPICAL PHYSICAL PROPERTIES
| Light Grade |
| Film Thickness |
0.015 mm |
| Typical Surface Finish |
2.0 μm Ra |
| Area covered by 100g |
1.875m² |
| Product coverage after drying |
2mg/cm² |
| MEDIUM GRADE |
| Film Thickness |
0.03 mm |
| Typical Surface Finish |
3.0 μm Ra |
| 100g reichen für |
1.125m² |
| Product coverage after drying |
4mg/cm² |
| HEAVY GRADE |
| Film Thickness |
0.09 mm |
| Typical Surface Finish |
3.5 μm Ra |
| Area covered by 100g |
0.56m² |
| Product coverage after drying |
12mg/cm² |
Product Expiry: 10/30/2024
