General Information
Moly Grade Anti-Seize is a low friction lubricant that prevents wear or galling on gears or splines operating under high load at low speed. Moly Grade Anti-Seize will withstand pressures to 500,000 psi and perform to 650ºF (340ºC). This product is also recommended where copper contamination must be avoided. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers or as a gasket release agent, etc.
Product Description
SAF-T-EZE Moly-Grade Anti-Seize is a smooth, non-separating formula consisting of lithium soap thickened grease, into which is compounded very fine molybdenum disulfide, as well as graphite lubricants and corrosion fighting inhibitors. This high-performance grease and solid additives provides extreme pressure lubricating properties that prevents galling and cold welding, and at the same time prevents water wash-out and galvanic pitting from electrolysis of road salt, acid rain or salt water. SAF-T-EZE Moly-Grade Anti-Seize is non-hardening. The particles present are inert and will not evaporate at extreme temperatures and their heat resistant qualities will prevent carbon fusion and seizure at temperatures up to 650ºF. This antiseize compound does not contain lead, copper or halogen compounds.
Specifications
Product: |
MBT-10 |
Part No. : |
80837 |
Container Size: |
10 oz Brush Top |
Colour: |
Black |
Temperature Range: |
-65°F to 650°F |
NLGI: |
3-4 |
Specific Gravity: |
1.31 |
Weight per Gallon: |
10.93 lb |
Penetration Range: |
180 ± 280 |
Drop Point: |
350°F |
Flash Point C.O.C: |
>302°F |
Particle Size: |
1 Mil Maximum (25) |
"K" Value: |
0.13 |